Tried blue tape on my drawer slides during a glue-up, wish I'd done it sooner
Was gluing up a set of 6 maple drawers for a kitchen job in Boise last Friday and got tired of wiping squeeze-out off the slides. So I ran a strip of blue painter's tape right over the metal before clamping, thinking I'd have to dig it out later. Pulled the tape the next morning and the slides were spotless, no scraping, no little cured drips gumming up the rollers. Took me all of 2 minutes per drawer and saved probably 20 minutes of cleanup per box. Anyone else doing something dumb simple like this that you wish you'd figured out years ago?
A buddy of mine runs a small cabinet shop out in Nampa and he had a drawer glue-up go sideways last year because of this exact thing. He didn't tape the slides, and a blob of Titebond ran down into one of the rollers. He didn't catch it until the drawer was in the house and the homeowner called him back a week later saying it pulled hard. He had to drive out there, pull the box, chip the dried glue out with a chisel, and swap the slide anyway because the roller was shot. Cost him half a Saturday and a free service call over something that two minutes of tape would've stopped. He keeps a roll on the bench now like it's a tool.