Can we talk about how I was marking conduit bends with a Sharpie for 8 years before a helper showed me the tape trick? | Construction Tech - Opinions Matter
Can we talk about how I was marking conduit bends with a Sharpie for 8 years before a helper showed me the tape trick?
I always eyeballed my offsets and ended up scrapping 3 or 4 sticks of 1/2 inch EMT on a big pull last year. A guy on my crew pulled out a roll of blue painter's tape and wrapped it right at the arrow before bending, and I could see the mark from across the room. Now I keep a roll in my pouch, but is there a better way to mark bends that won't leave sticky gunk on the pipe?
Scrapping 3 or 4 sticks of 1/2 inch EMT" is not the end of the world. That stuff is cheap and you learn from it. The tape trick works but it's not some big secret, guys have been doing it forever. Painter's tape comes right off and doesn't leave gunk, so the problem is already solved. Sounds like you just want a reason to talk about tape.